ESC-DTG M-Series
ESC-DTG M-Series
ESC-DTG M2Strike a new path with a trend-setting digital printing system for industrial textile decoration.
Enhance your productivity and extend your product range by new products such as jeans, hoodies, towels, caps, etc. – all from one printer
Benefits of ESC-DTG M-Series:
+ High speed |
|
- prints 2 – 8 shirts simultaneously by means of scalable platens. Thanks to a wide range of TucLoc™
platens you can adapt your DTG M2 to growing needs of productivity.
- don’t settle for low 600 dpi, try faster 1440 dpi with more ink placement
- enhanced print speed through processor driven conveyor
+ even more flexibility
- direct digital printing on light and dark textiles in a size of 610 x 500 mm or 610 x 1200 mm
- wide all-over prints
- enlarge your range of products: jeans, zip hoodies, shirts and even clothing panels
- water-based pigmented textile inks for any kind of textile fabric whether natural, synthetic or blended
+ all new technical conception – laid out for industrial requirements
- solid and robust machine design
- completely new firmware for enhanced resolution and ink drop technology
- 46 pl droplet size for white at 720 dpi – scaleable for all supported resolutions
- optimised ink management (WIMS) with recirculation system for white ink
- automatic height adjustment (25 - 125 mm)
- Interweave Technology eliminates banding at all resolutions
- high accuracy by servo driv
Machine - Highlights:
| APCP (active print head collision protection) | White ink management system (WIMS) | Interweave Technologie |
|
|
|
|
By incorporating light beam detection sensors any obstacle getting in the way of the print path is automatically detected and the active drive system will drop the pallet while printing, ensuring that head strikes are drastically reduced while still maintaining your prints |
By recirculation of ink via pressurized peristaltic pump system coupled with pressure release filters and dampers, problems such as print head clogging and maintenance downtime will be a thing of the past. |
The all new Interweave Technology is a core development in digital textile printing which delivers greater flexibility and print quality for a wider range of garments. More ink when and where you need it! Textiles are basically fibres in a grid pattern. With Interweave Technology ink drops are being laid down in a wave pattern across this grid of fibre - increasing saturation and |
DTG One Pass Fast
A uniquely beneficial process that allows both white base and colours to be printed in just one pass. Normally, dark shirts require a white base before CMYK colours, i.e. the print image,is being printed. The One Pass Fast Technology combines these two steps into one - thus reducing print times by half – 2 shirts in 150 seconds with vibrant colours. Please note that print trials must be undertaken prior to production as this function is not equally suitable
for all images.
Scaleable production:
The DTG M-series is 100 % flexible with a multitude of TucLocTM platen options for kids sizes through to all-over prints and even caps.
The M-series in standard configuration supports 2 standard shirts with a unique bridge to allow extra wide prints to a maximum of 610 x 500 mm.
Big image area options – use the M4 with our unique platen drive swap out mechanism for multiple production up to 8 shirts or full length jeans, towels, etc. in an area of 610 x 1200 mm.
You can configure your M-series to your customer’s individual needs.
Technical data DTG - M2 / M4
| Technical Data | DTG-M2 | DTG-M4 |
| printing method | Piezo InkJet | Piezo InkJet |
| max. print size |
610 x 500 mm, |
610 x 900 mm extendable to 610 x1200 mm in length |
| max. print height | 25 – 125 mm | 25 – 125 mm |
| max. print resolution | 720 x 1140 dpi | 720 x 1140 dpi |
| colours |
8 (2 x CMYK or CMYK + 4 x W) |
8 (2 x CMYK or CMYK + 4 x W) |
| ink supply |
pressurized CMYK ink tanks, recirculation for white |
pressurized CMYK ink tanks, recirculation for white |
| shirt platens | 2 x 295 x 420 mm on one base | 4 x 295 x 420 mm |
| electrics | 110-240 V, 50-60 Hz, 1/0A/110-120V | 110-240 V, 50-60 Hz, 1/0A/110-120V |
| power consumption | 55 W or less, standby: 5 W, off: 1 W | 55 W or less, standby: 5 W, off: 1 W |
| operating system | Windows Vista or XP | Windows Vista or XP |
| RIP software | DTG Rip Pro | DTG Rip Pro |
| dimensions (lxwxh) |
1270 x 980 x 550 mm |
1555 x 1205 x 1205 mm |
| weight | approx. 96 kg |
ESC-DTG Platen Organizer
software upgrade for creating individual templates for shirt platens (sleeve platens, youth platens or even self-designed platens).
ESC DTG TucLoc™ Platen options:
multiple pallet options
|
|
|
|
TucLoc™ adult platen 295 mm x 420 mm |
TucLoc™ youth platen 266mm x 330mm |
TucLoc™ dual toddler platen 190mm x 254mm |
|
|
|
|
TucLoc™ dual sleeve platen 108mm x 420mm |
TucLoc™ dual cap and low profile platen |
