High Press Plus E3 as stop-cylinder
ESC Stop-cylinder leaves nothing to be desired.
ESC-High Press Plus E3 ESC-High Press Plus E3
With the new E3 version ESC has achieved once again to enhance the high-quality standard of the successful HIGH PRESS series of cylinder screen printing machines.
New technical expertise which was gained by intense and mutual co-operation with our customers has now been implemented in this new machine generation. The ESC stop cylinder machine leaves nothing to be desired. Easy operation, optimum precision and high reliability of the production process are assured.
|
High Press Plus E3
|
max. sheet size
|
screen frame sizes
|
max. sheet size
|
|
model 1
|
600 x 800 mm
|
1070 x 1070 mm
|
600 x 800 mm
|
|
model 2
|
720 x 1020 mm
|
1140 x 1280 mm
|
720 x 1020 mm
|
|
model 3
|
750 x 1500 mm
|
1170 x 1300 mm
|
750 x 1050 mm
|
Options:
• available with either front pick-up or rear pick-up
feeder as per choice
• pneumatic clamping of squeegee and flood coater
• integrated cleaning station in the entry section of
the machine
|
• RKS squeegee system
• antistatic mechanism
• polishing calender
|
Specialties:
|
|
|
|
ESC-HIGH PRESS line with polishing calender
|
ESC UV-IR dryer with active cooling section
|
ESC automatic sheet stacker
|
Features of ESC-HIGH PRESS ‘PLUS’ E3:
-
the 5.7“ touch screen which is integrated in the swivelling operation panel does leave nothing to be desired; easy and comfortable handling due to clear colouring; whereby programming can be carried out in accordance with customer requirements
-
electronic control of the printing speed which is infinitely variable
-
parameter settings can be programmed by the operator according to user and application requirements
-
extremely short set-up times
-
in case of spoilt sheets the machine can either be set to standstill or squeegees can be put into neutral position
-
electronic double-sheet control in entry section of the machine
-
opto-electronic sheet control of the leading edge as well as at the lateral feeding on the right and on the left
-
adjustable vacuum in the entry section of the machine to support material transport
-
ground high-precision cylinder with adjustable vacuum suction and blowing air
-
for service and cleaning jobs it is possible to easily have the complete master frame including aligned screen moved out of the machine after which the screen is freely accessible from above and from below; after completion of cleaning job printing can be continued with precise and accurate register
-
for the duration of cleaning job, a drip pan for ink will automatically move under the squeegee and flood coater
-
in order to assure optimum access for the cleaning of screens, it is possible to have the machine exit hinged out
-
adjustment of squeegee angle without change of print zenith
-
the zenith position of the squeegee/flood coater assembly towards the print cylinder is adjustable via analogue display
-
pneumatic locking of the master frame
-
pneumatic locking of the screen
-
substrate height centrally adjustable to adapt to material thickness; settings with analogue display
-
position of squeegee action adjustable to determine start of print
-
the stainless steel plate with surface pattern in the entry section of the machine serves to minimize electrostatic charge
-
reference points integrated in the master frame for 3-point-alignment
-
ball rail system in the entry section for optimum material feeding
-
synchronous hold-down devices
-
adjustable vacuum in the machine exit
-
automatic central lubrication leads to long maintenance intervals
Machine Details:
|
|
|
|
precise gripper system with single spring-loaded grippers
|
high-precision print head with pneumatic squeegee pressure compensation
|
micrometric screen fine adjustment, centrally from the operator side
|
|
|
|
|
central adjustment of pull lay easily from the outside
|
precise alignment of sheets by pull lays or push lays
|
clear display for operator convenience
|
Technical Information:
|
Technical data
|
ESC-HIGH PRESS E3 model 1:
|
ESC-HIGH PRESS E3 model 2:
|
ESC-HIGH PRESS E3 model 3:
|
|
max. printing size
|
590 x 800 mm
|
710 x 1020 mm
|
740 x 1050 mm
|
|
max. sheet size
|
600 x 800 mm
|
720 x 1020 mm
|
750 x 1050 mm
|
|
min. sheet size
|
270 x 350 mm
|
350 x 560 mm
|
350 x 560 mm
|
|
gripper margin
|
10 mm
|
10 mm
|
10 mm
|
|
screen frame size
|
1070 x 1070 mm
|
1140 x 1280 mm
|
1170 x 1300 mm
|
|
squeegee angle adjustment
|
30°
|
30°
|
30°
|
|
screen fine adjustment
|
+/- 10 mm
|
+/- 10 mm
|
+/- 10 mm
|
|
max. speed depending on material properties
|
3000 p/h
|
3000 p/h
|
3000 p/h
|
|
connected load
|
approx. 7.6 kW
|
approx. 8.3 kW
|
approx. 12 kW
|
|
mains supply
|
400 V / 50 Hz
|
400 V / 50 Hz
|
400 V / 50 Hz
|
|
air supply
|
6 bar
|
6 bar
|
6 bar
|
|
net weight
|
4000 kg
|
5300 kg
|
5500 kg
|
|
dimensions (l x w x h)
|
4280 x 2480 x 1710 mm
|
4800 x 2800 x 1500 mm
|
4800 x 2800 x 1800 mm
|
ESC-High Press Plus E3
